壳聚糖/PVA微粒上Cu2+的吸附平衡与动力学

采用粒径＜200μm、在酸碱介质中溶胀率小且能稳定存在的壳聚糖/PVA微粒对Cu2+的吸附进行了研究,结果表明,在pH 6,室温条件下,其饱合吸附量达56.0mg/g,随温度升高,吸附量降低.通过计算不同温度下各热力学参数△G0、△H0和△S0,证实该吸附为自发的放热过程.对实验数据运用相关数学模型拟合,显示等温吸附平衡符合Langmuir模型,吸附过程动力学更适合二级反应,被吸附在壳聚糖/PVA微粒上的Cu2+,可被0.01mo/L的EDTS或HNO3溶液快速地脱附出来,其洗脱率分别为85.3%和65.9%.     

Effects of acid,acid-ZVI/PMS,Fe(Ⅱ)/PMS and ZVI/PMS conditioning on the wastewater activated sludge(WAS)dewaterability and extracellular polymeric substances(EPS)

The effects of four conditioning approaches:Acid,Acid-zero-valent iron(ZVI)/peroxydisulfate(PMS),Fe(Ⅱ)/PMS and ZVI/PMS,on wastewater activated sludge(WAS) dewatering and organics distribution in supernatant and extracellular polymeric substances(EPS) layers were investigated.The highest reduction in bound water and the most WAS destruction was achieved by Acid-ZVI/PMS,and the optimum conditions were pH 3,ZVI dosage 0.15 g/g dry solid(DS),oxone dosage 0.07 g/g DS and reaction time 10.6 min with the reductions in capillary suction time(CST) and water content(Wc) as 19.67% and 8.49%,respectively.Four conditioning approaches could result in TOC increase in EPS layers and supernatant,and protein(PN) content in tightly bound EPS(TB-EPS).After conditioning,organics in EPS layers could migrate to supernatant.Polysaccharide(PS) was easier to migrate to supernatant than PN.In addition,Acid,Acid-ZVI/PMS or Fe(Ⅱ)/PMS conditioning promoted the release of some polysaccharides containing ring vibrations v P=O,v C-O-C,v C-O-P functional groups from TB-EPS.ESR spectra proved that both radicals of SO_4~-· and·OH contributed to dewatering and organics transformation and migration.CST value of WAS positively correlated with the ratios of PN/PS in LB-EPS and total EPS,while it negatively correlated with TOC,PN content and PS content in TB-EPS,as well as PS content in supernatant and LB-EPS.BWC negatively correlated to zeta potential and TOC value,PN content,and HA content in supernatant.     

Enhanced activity of ZnS(111) by N/Cu co-doping:Accelerated degradation of organic pollutants under visible light

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment.In this study,N/Cu co-doped ZnS nanosphere photocatalys(N/Cu-ZnS) is synthesized by a hydrothermal method for the first time.After doping,the tex ture of nanosphere becomes loose,the nanometer diameter is reduced,making the specific surface area of catalyst increased from 34.73 to 101.59 m²/g.The characterization results show that more ZnS (111) crystal planes a...     

Promotional effect of cobalt doping on catalytic performance of cryptomelane-type manganese oxide in toluene oxidation

The cryptomelane-type manganese oxide (OMS-2)-supported Co (xCo/OMS-2; x = 5, 10, and 15 wt.%) catalysts were prepared via a pre-incorporation route. The as-prepared materials were used as catalysts for catalytic oxidation of toluene (2000 ppmV). Physical and chemical properties of the catalysts were measured using the X-ray diffraction (XRD), Fourier transform infrared spectroscopic (FT-IR), scanning electron microscopic (SEM), X-ray photoelectron spectroscopy (XPS), and hydrogen temperature-programmed reduction (H₂-TPR) techniques. Among all of the catalysts, 10Co/OMS-2 performed the best, with the T_90%, specific reaction rate at 245°C, and turnover frequency at 245°C (TOF_Co) being 245°C, 1.23 × 10⁻³ mol_toluene/(g_cat·sec), and 11.58 × 10⁻³ sec⁻¹ for toluene oxidation at a space velocity of 60,000 mL/(g·hr), respectively. The excellent catalytic performance of 10Co/OMS-2 were due to more oxygen vacancies, enhanced redox ability and oxygen mobility, and strong synergistic effect between Co species and OMS-2 support. Moreover, in the presence of poisoning gases CO₂, SO₂ or NH₃, the activity of 10Co/OMS-2 decreased for the carbonate, sulfate and ammonia species covered the active sites and oxygen vacancies, respectively. After the activation treatment, the catalytic activity was partly recovered. The good low-temperature reducibility of 10Co/OMS-2 could also facilitate the redox process accompanied by the consecutive electron transfer between the adsorbed O₂ and the cobalt or manganese ions. In the oxidation process of toluene, the benzoic and aldehydic intermediates were first generated, which were further oxidized to the benzoate intermediate that were eventually converted into H₂O and CO₂.     

PVC包装材料中酞酸酯增塑剂残留的ASE-GC-MS分析

针对PVC包装材料中酞酸酯（PAEs）增塑剂残留，采用加速溶剂萃取（ASE）和GC／MS联用技术分析5种PAEs（DMP，DEP，DBP，BBP，DEHP），结果表明加速溶剂萃取用于PVC包装材料中PAEs的提取，最佳温度条件为120℃，最佳循环次数为3次。方法检出限达到0．1mg／kg，回收率达到95．5％-99．8％；并且具有很好的重现性和精密度。     

光电催化降解壬基酚影响因素研究

采用sol-gel法制备TiO2薄膜光电极,以该电极为工作电极,铂丝作对电极,饱和甘汞电极为参比电极,对壬基酚的光电催化降解进行了研究。结果表明:该电极具有n型半导体的特征行为。在外加偏压为+0.8V、pH=5、、30mg/L的H2O2中对初始浓度为20mg/L的壬基酚溶液光照180min降解率达62.22%。讨论了氧的存在、外加偏压、pH等因素对光电催化反应的影响。     

多孔氧化铝层制备的研究

采用预腐蚀与交流腐蚀相结合的方法．研究了多孔氧化铝层的制备工艺．探讨了制备工艺中各步骤的作用以及影响因素。利用扫描电镜，研究了多孔氧化铝层制备工艺对铝箔微观形貌的影响。研究表明．交流腐蚀工艺对铝箔表面微观形貌的改变作用最明显。一次后处理后铝箔表面蚀孔变密．氧化膜的结构更加疏松细腻。二次后处理，调整和热处理等步骤对铝箔表面的微观形貌影响不大。     

Cu／A1-Ce-PILC在丙烯选择性催化还原NO反应中的失活研究

采用聚合羟基复合阳离子合成交联黏土A1-Ce-PILC，经SO4^2-改性后，以浸渍法制备了铜基交联黏土催化剂Cu／A1-Ce-PILC，并将其应用于C3H6选择性催化还原NO的反应，350℃时NO转化率达到最大值56％，700℃时下降至22％．为探究催化剂高温失活的原因，采用XPS、TPR、TGA、Py-IR和DSC对反应前后催化剂的物化性能进行了表征．结果表明，经过H2预处理活化后活性组分Cu物种以Cu^＋形式存在，而高温反应后Cu物种除以Cu^＋和Cu^2＋ 2种形式存在外，还出现了少量CuO物种；高温反应过程中A1-Ce-PILC上结构羟基和SO4^2-流失导致催化剂表面酸性减弱；此外，还存在表面积炭覆盖了部分活性中心并堵塞了催化剂孔道的现象．这三者的共同影响促进了C3H6深度氧化，抑制了NO还原，从而导致催化剂的失活．     

Carbon isotope ratios in logged and unlogged boreal forests: Examination of the potential for determining wildlife habitat use

Due to assimilation of recycled CO₂ from litter decomposition and photosynthetic changes in carbon fractionation at low light levels, the foliage at the base of a forest is often more depleted in¹³C compared to that exposed to the atmosphere in either the canopy or in open clearings. This is referred to as the canopy effect. African research has indicated that these habitat differences in foliar ¹³C can be substantial enough to affect the carbon isotope ratios of resident fauna. Previous work documenting a 30-year chronology on moose teeth from Isle Royale National Park indicated a progressive depletion in¹³C and suggested that this could be due to forest regrowth following extensive burning. The present study examined the assumption implicit in this hypothesis that foliar ¹³C varies between open and closed boreal forest sites. I found a marginal canopy effect of 2 ¹³C difference between upper canopy and ground flora for a forest in northwestern Ontario and an average difference of 1.2 in under- and mid-story vegetation between closed forests and open clear-cuts. Because of these small differences, the utility of carbon isotope analysis in quantifying temporally integrated exploitation of deforested habitats will be low for northern boreal locations. In denser forests, such as those in the tropics or western North American where the canopy effect can be expected to be much greater, ¹³C analysis may still offer some promise for determining selection by wildlife of disturbed habitats.     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.